In the past, rolling back an odometer required manual rollback of the numbers on the mechanical devices recording the distance traveled by a vehicle. Nowadays, the odometers are digital, with mechanical odometers phased out completely in the early 2000s.
Odometer fraud involves changing the reading on an odometer to fraudulently show that a vehicle has accrued lower mileage than it has. By looking up “How to change odometer” fraudsters can falsely increase the vehicle’s value.
This blog looks at the tricks used by fraudsters to tamper with odometer readings.
How to change odometer reading in vehicles?
Crooks use several tricks to roll back odometer readings. Odometer readings are changed in the following ways:
1 - Disable the odometer – In older vehicles, disabling the odometer can prevent it from reading the mileage as it uses a mechanical wire.
2 - Detach the dash unit temporarily - In some vehicles, you can drive for many thousand miles without an odometer gauge by unplugging the whole dash. The odometer starts reading from the last recorded point when you reinstall the unit.
3 - Change the instrument cluster – The mileage can be altered by swapping the instrument cluster with a used instrument cluster.
Can you turn back a digital odometer?
There was a belief that the advent of digital odometers could see the end of odometer fraud. The question, ‘can you turn back a digital odometer?’ is very common.
Unfortunately, odometer fraud is still very widespread and exceedingly difficult to detect. Fraudsters can roll back digital odometers by taking out the vehicle’s circuit board to change the reading or using rollback devices that connect right to the vehicle’s electronic system.
Concluding note
It is important to be alert and look for signs of odometer tampering. If you believe you have been a victim of odometer fraud, please get in touch with the attorneys at Allen Stewart.
To know more about How odometer works please visit our website: allenstewart.com
0 comments:
Post a Comment